Product introduction: Dioctyl adipate is an organic compound, a light yellow or colorless oily liquid, soluble in organic solvents such as alcohol and ether, but insoluble in water, and can be used as a plasticizer.
Metrics:
CAS | 103-23-1 |
Molecular formula | C22H42O4 |
Melting point | -67.8°C |
Boiling point | 214°C |
Chroma≤ | 20 |
Acid value (mg KOH/g)≤ | 0.07 |
Content ≥ | 99.5% |
Packaging, storage and transportation | 190KG/drum |
Uses: This product is a typical cold-resistant plasticizer for polyvinyl chloride, vinyl chloride copolymer, polystyrene, nitrocellulose, ethyl cellulose and synthetic rubber, with high plasticization efficiency. It can give the product good low-temperature flexibility and light resistance. And with DOP, DBP and other main plasticizers used in cold-resistant agricultural film, frozen food packaging film, wire and cable coating, artificial leather, board and outdoor water pipes, etc.
Storage and transportation: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Avoid direct sunlight. Keep the container tightly closed. It should be stored separately from the oxidant, avoid mixed storage, and be equipped with corresponding types and quantities of fire-fighting equipment. The storage area should be equipped with leakage emergency treatment equipment and suitable storage materials.
Column navigation
Addr:Room 1201, Ronghui Plaza, 21 Chengji Road, High-tech Zone, Suzhou
Tel:0512-66550181
Mail:hzx@szxuehang. com